2000W APS INT Series 12VDC 230V Inverter/Charger with Auto Transfer Switching, Hardwired
Specifications
Additional Information
- UPC: 37332090331
- Manufacturer: TRIPPLITE
- Specifications
- Nominal Output Voltage(s) Supported: 230V
- Frequency Compatibility: 50 Hz
- Output Receptacles: Hardwire
- Output (Watts): 2000
- Continuous Output Capacity (Watts): 2000
- Peak Output Capacity (Watts): 4000
- Output Voltage Regulation: LINE POWER (AC): Maintains 230V nominal sine wave output from line power source. INVERTER POWER (AC): Maintains PWM sine wave output voltage of 230 VAC (+/-5%).
- Output Frequency Regulation: 50 Hz (+/- 0.3 Hz)
- Overload Protection: Includes 10A input breaker dedicated to the charging system and 15A output breaker for AC output loads
- Nominal Input Voltage(s) Supported: 230V AC
- Recommended Electrical Service: DC INPUT: Requires 12VDC input source capable of delivering 192A for the required duration (when used at full continuous capacity - DC requirements increase during OverPower and DoubleBoost operation). For automotive applications, professional hardwire installation with 400A minimum battery system fusing is recommended.
- Maximum Input Amps / Watts: DC INPUT: Full continuous load - 192A at 12VDC. AC INPUT: 17 amps at 230VAC with full inverter and charger load (8.7A max charger-only / combined input load to support charger and AC output is automatically controllable to 66%-33%-0% based on AC output loading using the charger limiting set points - see manual for setting instructions)
- Input Connection Type: DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: Hardwire via built in junction box with cover plate
- Voltage Compatibility (VAC): 230
- Voltage Compatibility (VDC): 12
- Input Frequency: 50Hz
- Expandable Battery Runtime: Runtime is expandable with any number of user supplied wet or gel type batteries
- DC System Voltage (VDC): 12
- Battery Pack Accessory (Optional): 98-121 sealed lead acid battery(optional)
- Battery Charge: Selectable 15 / 60 amp
- Expandable Runtime: Yes
- Front Panel LEDs: Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported). See manual for sequences.
- Switches: 3 position on/off/remote switch enables simple on/off power control plus "auto/remote" setting that enables distant on/off control of the inverter system when used in conjunction with optional APSRM4 accessory when used in inverter mode. In AC uninterruptible power mode, "auto/remote" setting enables automatic transfer from line power to battery power - to maintain continuous AC power to connected loads.
- Shipping Dimensions (hwd / in.): 13.25 x 15 x 21.13
- Shipping Weight (lbs.): 46
- Unit Dimensions (hwd / in.): 7 x 8.5 x 14
- Unit Weight (lbs.): 42
- Cooling Method: Multi-speed fan
- Material of Construction: Polycarbonate
- Form Factors Supported: Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting information)
- Relative Humidity: 0-95% non-condensing
- Transfer Time (Line Power to Battery Mode): 20 milliseconds (typical - compatible with many computers, servers and networking equipment - verify transfer time compatibility of loads for UPS applications)
- Low Voltage Transfer to Battery Power: In AC "auto" mode, inverter/charger switches to battery mode as line voltage drops to 144V (user adjustable to 163, 182, 201V - see manual)
- High Voltage Transfer to Battery Power: In AC "auto" mode, inverter/charger switches to battery mode as line voltage increases to 259V (user adjustable to 264 - see manual)
- Load Sensing: Optional load sense function enables automatic inverter shutoff and startup as connected equipment is powered off and on. Front panel load sense potentiometer can be set to shutoff or turn on inverter power in response to loads of any level, up to 150 watts.
- Product Warranty Period (U.S. & Canada): 1-year limited warranty
- Product Warranty Period (International): 2-year limited warranty
- Product Warranty Period (Mexico): 2-year limited warranty
- Product Warranty Period (Puerto Rico): 1-year limited warranty
- Remote Control Capability: Yes
- Downloads: {"documents":[{"url":"https:https:\/\/www.tripplite.com\/shared\/techdoc\/Runtime-Chart\/APSINT2012-Runtime-Chart-EN.pdf","title":"APSINT2012 runtime chart"},{"url":"https:https:\/\/www.tripplite.com\/shared\/literature\/Brochure\/230V-Inverter-Charger-Brochure-953081-EN.pdf","title":"230V APS Inverter Brochure 953081 (English)"}],"miscellanous":[{"url":"https:https:\/\/www.tripplite.com\/products\/inverter-buying-guide","title":"Inverter Buying Guide"},{"url":"https:https:\/\/www.tripplite.com\/resellers\/imageSearch\/mid\/1339","title":"Download images for this product"}]}
- Manufacturer Product URL: https://www.tripplite.com/2000w-powerverter-aps-int-12vdc-230v-inverter-charger-auto-transfer-switching-hardwired~APSINT2012/
- Packaging
- Certifications
- Details: "Overview\nThe APSINT2012 2000W APS INT Series 12V DC 230V AC Inverter\/Charger is a reliable power source for a wide variety of equipment ranging from power tools and pumps to portable lighting and computer equipment in heavy-load conditions. With no fumes, fuel or excess noise, its an excellent alternative to generator power.\n\nThe DC-to-AC inverter features an automatic line-to-battery transfer switch and integrated charging system that allow it to work as a vehicle inverter, standalone AC power source or extended-run UPS. It delivers 2000W of continuous power, 3000W up to one hour, or 4000W of peak power up to 10 seconds during equipment startup or cycling. An automatic overload detector, cooling fan and resettable AC circuit breakers protect the unit from damage.\n\nDesigned for easy installation in RVs, over-the-road trucks, fleet vehicles and conversion vans, the APSINT2012 converts stored power from any 12V battery or automotive DC source to safe, stable, computer-grade AC power for unlimited runtime in heavy-load conditions. When powered by an external AC source, the unit keeps the user-supplied battery charged via a three-stage 15\/60A selectable charging system while simultaneously delivering AC power to connected equipment.\n\nWhen used as a UPS, the APSINT2012 responds to blackouts and brownouts with an automatic, instantaneous transfer to battery-derived AC output. LEDs indicate AC\/DC operational modes, overload status, DC voltage level, shutdown and system fault."
- List price: No
Loading...