SmartPro 120V 700VA 450W Medical-Grade Line-Interactive Tower UPS with 4 Outlets, Full Isolation, USB, DB9
Specifications
Additional Information
- UPC: 37332095107
- Manufacturer: TRIPPLITE
- Specifications
- Output Volt Amp Capacity (VA): 700
- Output Watt Capacity (Watts): 450
- Power Factor: 0.6
- Nominal Output Voltage(s) Supported: 115V; 120V
- Frequency Compatibility: 60 Hz
- Output Voltage Regulation (Line Mode): -18%, +8%
- Output Voltage Regulation (Battery Mode): 115V (+/- 5%)
- Output Receptacles: (4) 5-15R
- Output Receptacle Details: Hospital grade output receptacles
- Output AC Waveform (AC Mode): Sine wave
- Output AC Waveform (Battery Mode): PWM sine wave
- Rated input current (Maximum Load): 5.5A
- Nominal Input Voltage(s) Supported: 120V AC
- UPS Input Connection Type: 5-15P-HG
- Input Circuit Breakers: 10A
- UPS Input Cord Length (ft.): 6
- Recommended Electrical Service: 15A 120V
- Input Cord Length (ft.): 6
- Input Phase: Single-Phase
- Full Load Runtime (min.): 18 min. (450w)
- Half Load Runtime (min.): 42 min. (225w)
- DC System Voltage (VDC): 36
- Battery Recharge Rate (Included Batteries): Less than 4 hours from 10% to 90%
- Internal UPS Replacement Battery Cartridge: RBC53
- Battery Access: Battery access door
- Battery Replacement Description: Hot-swappable, user replaceable batteries
- Expandable Runtime: No
- Voltage Regulation Description: Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 81 to 143
- Overvoltage Correction: Input voltages between 126 and 143 are reduced by 9%
- Undervoltage Correction: Input voltages between 96 and 106 are boosted by 10%
- Severe Undervoltage Correction: Input voltages between 81 and 95 are boosted by 21%
- Switches: 2 Switches control off/on power status and alarm-cancel/self-test operation
- Alarm Cancel Operation: Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status
- Audible Alarm: Audible alarm indicates power-failure, overload and low-battery conditions
- LED Indicators: 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
- UPS AC Suppression Joule Rating: 480
- UPS AC Suppression Response Time: Instantaneous
- EMI / RFI AC Noise Suppression: Yes
- AC Suppression Joule Rating: 480
- AC Suppression Response Time: Instantaneous
- Output Isolation Transformer: Hospital grade load isolation transformer
- Leakage Current: Equal to 100 microamps
- Installation Form Factors Supported with Optional Accessories: Wallmount(UPSWM - tower mounting kit)
- Primary Form Factor: Tower
- UPS Power Module Dimensions (hwd, in.): 12.8 x 7.5 x 9
- UPS Power Module Weight (lbs.): 44.2
- UPS Power Module Weight (kg): 20.05
- UPS Shipping Dimensions (hwd / in.): 18.2 x 11.8 x 13.5
- Shipping Weight (lbs.): 49
- Cooling Method: Fan
- UPS Housing Material: PVC
- Primary UPS Height (mm): 325
- Primary UPS Width (mm): 190
- Primary UPS Depth (mm): 229
- Shipping Height (mm): 462
- Shipping Width (mm): 300
- Shipping Depth (mm): 343
- Operating Temperature Range: +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
- Storage Temperature Range: +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
- Relative Humidity: 0 to 95%, non-condensing
- AC Mode BTU / Hr. (Full Load): 97.7
- Battery Mode BTU / Hr. (Full Load): 189.1
- AC Mode Efficiency Rating (100% Load): 94%
- Communications Interface: USB; DB9 Serial
- Network Monitoring Port Description: Supports detailed monitoring of UPS and site power conditions
- PowerAlert Software: For local monitoring via the UPSs built-in communication ports , download PowerAlert Local software at http://www.tripplite.com/poweralert
- Communications Cable: USB and DB9 serial cabling included
- Transfer Time: 2-4 milliseconds
- Low Voltage Transfer to Battery Power (Setpoint): 81
- High Voltage Transfer to Battery Power (Setpoint): 143
- Grounding Lug: Grounding lug
- Cold Start (Startup in Battery Mode During a Power Failure): Cold-start operation supported
- High Availability UPS Features: Hot swappable batteries
- Green Energy-Saving Features: Greater than 95% efficiency - GREEN UPS
- UPS Certifications: Meets FCC Part 15 Category A (EMI); ROHS (Restriction of Hazardous Substances); Tested to CSA (Canada); Tested to UL1778 (USA); Tested to UL60601-1 (medical grade)
- Product Warranty Period (Worldwide): 2-year limited warranty
- Downloads: ""
- Manufacturer Product URL: https://www.tripplite.com/smartpro-120v-700va-450w-medical-grade-line-interactive-tower-ups-4-outlets-full-isolation-usb-db9~SMART700HG/
- Packaging
- Certifications
- Details: "Overview\nTripp Lites SMART700HG medical-grade UPS system provides dependable battery backup and is fully compliant with UL 60601-1 regulations when plugged into a hospital-grade outlet, making it ideal for use in patient-care vicinities. The 700VA\/450W capacity provides up to 42 minutes of runtime for a half load, or 18 minutes for a full load so you can work through short power failures and perform an orderly system shutdown in a prolonged blackout.\n\nBuilt-in line-interactive voltage regulation corrects brownouts as low as 81V and overvoltages as high as 143V to normal 120V nominal output, without drawing battery power. The SMART700HGs built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes.\n\nThis UPS system features four NEMA 5-15R-HG hospital-grade outlets and has a hospital-grade NEMA 5-15P-HG plug with a 6 ft. cord for flexibility in placement. All four outlets provide both backup protection and surge protection, rated to 480 joules.\n\nThe SMART700HG also features diagnostic LEDs, as well as a USB port and a DB9 serial port that work with Tripp Lites free downloadable PowerAlert software for safe, unattended system shutdown and file saves in the event of a prolonged power failure."
- List price: No