SmartPro 120V 2.2kVA 1.9kW Line-Interactive Sine Wave UPS, 4U Short Depth, Extended Run, Network Card Options, USB, DB9
Specifications
Additional Information
- UPC: 37332142368
- Manufacturer: TRIPPLITE
- Specifications
- Output Volt Amp Capacity (VA): 2200
- Output kVA Capacity (kVA): 2.2
- Output Watt Capacity (Watts): 1900
- Output kW Capacity (kW): 1.9
- Power Factor: 0.86
- Nominal Output Voltage(s) Supported: 110V; 115V; 120V
- Nominal Voltage Details: 120v nominal output in battery mode
- Frequency Compatibility: 60 Hz
- Output Voltage Regulation (Line Mode): -18%, +8%
- Output Voltage Regulation (Battery Mode): +/- 5%
- Output Receptacles: (4) 5-15R; (4) 5-15/20R
- Load Management Receptacles: Three switchable single-outlet 5-15R load banks
- Output AC Waveform (AC Mode): Sine wave
- Output AC Waveform (Battery Mode): Pure Sine wave
- Rated input current (Maximum Load): 16A
- Nominal Input Voltage(s) Supported: 120V AC
- UPS Input Connection Type: 5-20P
- Input Circuit Breakers: 20A
- UPS Input Cord Length (ft.): 10
- Recommended Electrical Service: 20A 120V
- Input Phase: Single-Phase
- Full Load Runtime (min.): 11 min. (1900w)
- Half Load Runtime (min.): 28 min. (950w)
- Expandable Battery Runtime: Extended runtime supported via optional external battery packs
- External Battery Pack Compatibility: BP48V24-2U(limit 1); BP48V48RT4U(multi-pack compatible); BP48V27-2US(multi-pack compatible)
- DC System Voltage (VDC): 48
- Battery Recharge Rate (Included Batteries): Less than 3.6 hours from 10% to 90% (typical, full load discharge)
- Internal UPS Replacement Battery Cartridge: RBC94-2U(quantity 2)
- Battery Access: Front panel battery access door
- Battery Replacement Description: Hot-swappable, user replaceable batteries
- Expandable Runtime: Yes
- Voltage Regulation Description: Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 145
- Overvoltage Correction: Input voltages between 127 and 145 are reduced by 12%
- Undervoltage Correction: Input voltages between 96 and 108 are boosted by 12%
- Severe Undervoltage Correction: Input voltages between 83 and 95 are boosted by 24%
- Switches: 2 Switches control off/on power status and alarm-cancel/self-test operation; rear panel protected switches support low/high charger settings
- Alarm Cancel Operation: Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status
- Audible Alarm: Audible alarm indicates power-failure, overload and low-battery conditions
- LED Indicators: 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
- UPS AC Suppression Joule Rating: 570
- UPS AC Suppression Response Time: Instantaneous
- EMI / RFI AC Noise Suppression: Yes
- Included Mounting Accessory Description: 2 post rackmount installation accessories included
- Installation Form Factors Supported with Included Accessories: 2 post 19 inch rackmount
- Installation Form Factors Supported with Optional Accessories: 4 post rackmount(4POSTRAILKIT); Tower(2-9USTAND)
- Primary Form Factor: Rackmount
- UPS Power Module Dimensions (hwd, in.): 6.89 x 17.3 x 17.8
- Rack Height (U Spaces): 4
- Minimum Required Rack Depth (inches): 24.8
- UPS Power Module Weight (lbs.): 100.3
- UPS Power Module Weight (kg): 45.50
- UPS Shipping Dimensions (hwd / in.): 12.8 x 23.3 x 22.8
- Shipping Weight (lbs.): 128.9
- Cooling Method: Fan
- UPS Housing Material: Steel
- Minimum Required Rack Depth (mm): 630
- Primary UPS Height (mm): 175
- Primary UPS Width (mm): 439
- Primary UPS Depth (mm): 452
- Shipping Height (mm): 325
- Shipping Width (mm): 592
- Shipping Depth (mm): 579
- Operating Temperature Range: +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
- Storage Temperature Range: +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
- Relative Humidity: 0 to 95%, non-condensing
- AC Mode BTU / Hr. (Full Load): 242
- Battery Mode BTU / Hr. (Full Load): 885
- AC Mode Efficiency Rating (100% Load): 97%
- Communications Interface: USB (HID enabled); DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface
- Network Management Cards: SNMPWEBCARD; WEBCARDLX; RELAYIOCARD
- Network Monitoring Port Description: Supports detailed monitoring of UPS and site power conditions
- PowerAlert Software: For local monitoring via the UPSs built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert
- Communications Cable: USB and DB9 cabling included
- WatchDog Compatibility: Supports Watchdog application, OS and hard-reboot restart options for remote applications
- Transfer Time: 5 milliseconds
- Low Voltage Transfer to Battery Power (Setpoint): 83
- High Voltage Transfer to Battery Power (Setpoint): 145
- Cold Start (Startup in Battery Mode During a Power Failure): Cold-start operation supported
- High Availability UPS Features: Hot swappable batteries
- UPS Certifications: Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A (EMI)
- Product Warranty Period (U.S. & Canada): 2-year warranty, 3 year with registration. Note: Registration is required for 3-year warranty.
- Product Warranty Period (International): 2-year limited warranty
- Product Warranty Period (Mexico): 2-year warranty, 3 year with registration. Note: Registration is required for 3-year warranty.
- Product Warranty Period (Puerto Rico): 2-year warranty, 3 year with registration. Note: Registration is required for 3-year warranty.
- Connected Equipment Insurance (U.S., Canada & Puerto Rico): $250,000 Ultimate Lifetime Insurance
- Downloads: {"documents":[{"url":"https:https:\/\/www.tripplite.com\/shared\/techdoc\/Owners-Manual\/932757.pdf","title":"Owner's Manual for SmartPro Rackmount UPS 932757"},{"url":"https:https:\/\/www.tripplite.com\/shared\/techdoc\/Owners-Manual\/932755.pdf","title":"Quick Start Guide for PowerAlert Power Management Software 932755"},{"url":"https:https:\/\/www.tripplite.com\/shared\/techdoc\/Owners-Manual\/932766.pdf","title":"Owner's Manual Addendum for External Battery Packs 932766 (Multi-langauge)"},{"url":"https:https:\/\/www.tripplite.com\/shared\/techdoc\/Owners-Manual\/933000.pdf","title":"Installation Guide for Select Rackmount UPS 933000"},{"url":"https:https:\/\/www.tripplite.com\/shared\/techdoc\/Owners-Manual\/933158.pdf","title":"Free 1-Year Warranty Extension with Registration 933158"},{"url":"https:https:\/\/www.tripplite.com\/shared\/techdoc\/Runtime-Chart\/SMART2200CRMXL-Runtime-Chart-EN.pdf","title":"SMART2200CRMXL runtime chart"},{"url":"https:https:\/\/www.tripplite.com\/shared\/literature\/Brochure\/Tripp-Lite-Integrated-Solutions-Brochure-9533AD-EN-Domestic.pdf","title":"Integrated Solutions Brochure 953479 (English)"},{"url":"https:https:\/\/www.tripplite.com\/shared\/literature\/White-Paper\/Common-Power-Problems-and-Power-Protection-Solutions-White-Paper-EN.pdf","title":"Common Power Problems and Power Protection Solutions White Paper 120v (English)"},{"url":"https:https:\/\/www.tripplite.com\/shared\/literature\/White-Paper\/Common-Power-Problems-and-Power-Protection-Solutions-White-Paper-230v-EN.pdf","title":"Common Power Problems and Power Protection Solutions White Paper 230v (English)"}],"miscellanous":[{"url":"https:https:\/\/www.tripplite.com\/shared\/literature\/Brochure\/UPS-Systems-Brochure-9533B9-EN-120V.PDF","title":"UPS Systems 120V Brochure 953426 (English)"},{"url":"https:https:\/\/www.tripplite.com\/products\/ups-buying-guide","title":"UPS Systems Buying Guide"},{"url":"https:https:\/\/www.tripplite.com\/products\/single-vs3-phase","title":"Single-Phase vs. 3-Phase Power"},{"url":"https:https:\/\/www.tripplite.com\/products\/custom-products","title":"Custom Products from Tripp Lite Are One Call Away"},{"url":"https:https:\/\/www.tripplite.com\/products\/economy-mode","title":"Economy Mode Explained"},{"url":"https:https:\/\/www.tripplite.com\/support\/articles\/articleid\/top-12-questions-when-choosing-a-network-ups","title":"Top 12 Questions to Consider When Choosing UPS Systems for Network\/Server Applications"},{"url":"https:https:\/\/www.tripplite.com\/products\/ups-sizing","title":"UPS Sizing"},{"url":"https:https:\/\/www.tripplite.com\/resellers\/imageSearch\/mid\/3825","title":"Download images for this product"}]}
- Manufacturer Product URL: https://www.tripplite.com/smartpro-120v-2.2kva-1.9kw-line-interactive-sine-wave-ups-4u-2-post-reduced-depth-rackmount-extended-run-snmpwebcard-option-usb-db9-serial~SMART2200CRMXL/
- Packaging
- Certifications
- Details: "Overview\nTripp Lite's SmartPro Compact Rackmount Uninterruptible Power Supply (UPS) offers line interactive voltage regulation, network grade surge suppression and long lasting battery support for critical network hardware during blackouts and extended power failures. Special reduced-depth housing, larger internal batteries, higher rated wattage and included 2 post rackmount installation hardware makes these systems ideal for network and telecom wiring closets and other limited-space installations. 97% line power mode efficiency saves operating costs over less efficient UPS types. Runtime is expandable with optional BP48V24-2U (limit 1), BP48V48RT4U (multi-pack compatible) and BP48V27-2US (multi-pack compatible) reduced-depth external battery packs.\n\nSMART2200CRMXL 4U rackmount 2200VA\/1900 watt UPS offers battery-derived sine wave AC output during power failures and extreme voltage variations. Line interactive Automatic Voltage Regulation (AVR) provides two levels of voltage boost during brownouts and one level of voltage cut during overvoltage conditions to maintain regulated 120V nominal output over an input range of 83-145V. Includes NEMA 5-20P input plug, NEMA 5-15R and 5-15\/20R output receptacles. Network management interfaces support simultaneous communications via USB port, DB9 serial port and optional network management accessory card slot. HID-compliant USB interface enables full integration with built-in power management and auto shutdown features of Windows and Mac OS X. Supports detailed monitoring of equipment load levels, self-test data and utility power conditions via all 3 network interfaces at once. PowerAlert monitoring software is available via free download. Emergency Power Off (EPO) interface. Integrated 3-bank programmable PDU switching supports load shedding and remote-reboot of up to 3 individual connected devices. 3-stage metered current monitoring and battery charge status LEDs. Utility power and voltage regulation LEDs. Audible alarm. Self-test. 2-post rackmount accessories included; 2-9USTAND tower stands. Field-replaceable, hot-swappable internal batteries and external battery packs. Attractive all-black color scheme."
- List price: No
Loading...